Carbonyte Systems offers:

Single Package Products

 

Carbonyte is dedicated to providing to the market, coatings that are single package which do not need any additional products to meet its intended use.

Airport Sealers FAA Fuel Resistant















Eco-Friendly Airport Sealers

Looking for an Asphalt Sealer which is not only good on the environment and those applying it, but also has the Fuel Resistant and other High Value Properties you want in a Sealer! Look Here and you will find what you're looking for!

Mission Statement of Carbonyte Systems
















Military Grade Pavement Sealers:  FAA Fuel Resistant Sealcoat / High Performance Type-S Slurry / Tough Fog Seal

Eco Friendly SealerWe at Carbonyte Systems Inc. are dedicated to providing our customers with the best service, materials and equipment at fair and marketable prices while continuing to improve on the current technologies. We are constantly striving to improve the Pavement Maintenance Industry with innovation in design and application. We use the most sophisticated equipment and experienced personnel to develop and expand the latest technologies in and outside the pavement industry. In 1998, the Space Travel industry brought an excitingly innovative and new technology to the pavement industry called "The Carbonyte Process™." As we continue to develop the technology of the Carbonyte Process™, we continue to look for other technologies and resources which are friendly to the environment and that can benefit the pavement industry.

Fuel PROOF testing now on video! TractionSeal-FP versus Coal Tar under Kerosene (Jet Fuel's main component: 1-K type kerosene)

 

AEROSPACE POLYMER SCIENCE BREAKTHROUGH

Aerospace Polymer Science Technology Bituminous asphalt, a byproduct of the distillation of crude oil, is the most widely utilized adhesive on earth. Worldwide, commercial applications annually consume in excess of sixty million short tons (60,000,000 tons); with over eighty five percent (85%) being applied in road surfacing system. A polymer additive system is now available, which economically converts asphalt into a superior performing thermoplastic. The asphalt, polymer additive innovation is referred to as the Carbonyte Process™. The technology is derived from a decade of vigorous, polymer science research and team development within the Lockheed Martin* Missiles and Space Company.

TECHNOLOGY BENEFITS

Asphalt is essentially a waste byproduct of the cracking and distillation process of crude oil. Depending upon which of the more valuable hydrocarbon petrochemicals were extracted from the column as the oil was fractionated the remaining asphalt physical and chemical properties may exhibit broad variability. The Visco-elastic, physical characteristics of asphalt, i.e. glass transition temperature, softening point, resistance to penetration and rheology under shear are all ultimately dependent upon the constituent molecular structure(s) remaining after distillation. The Carbonyte Process™ embodies the incorporation of complex, reactive synthetic minerals, generally at loadings of less than one percent (1%), into the bituminous asphalt resin. A critical first stop in the process is to perform a Molecular Asphalt Analysis (MAP). The MAP process identifies important intermolecular relationshipsFuel, Oil, Water Resistant and Proofwithin the neat asphalt resin; relationships which are always peculiar to: 1) the region from which the original crude oil was pumped and, 2) the distillation protocol utilized at the refinery. Once profiled, a custom configured polymer additive is prescribed for the asphalt which will achieve the most ideal, ultimate end use upgrades. Typically the Carbonyte Process™, which modifies carbon-carbon bonds within the asphalt, will substantially improve the asphalt's ductility, raise its softening point, increases adhesion to mineral surfaces; and, in the case of emulsions, render the cured film completely insoluble with a notable reduction in coating cure rates. Using the Carbonyte Process™ will assure longer lasting, improved hot and cold weather Performance for roofing, waterproofing and road binder asphalts.

EARTH Resin - Epoxy Alloy Recycled Tire Heteropoly

Earth ResinEARTH Resin is a waterborne, latex adhesive manufactured in an emultion polymerization reactor - similar to today's finest liquid elastomeric polymers - with the revolutionary innovation that the entire lattice structure is grown by grafting onto a nano-sized, partially deconstructed, scrap tire "seed," i.e. PRIME permutated ground tire rubber(P2GTR). The tremendous benefit of these process advancement(s) is a material which exhibits the cured film, tenacity of the tire rubber, the bonding of epoxy, the flexibility of elastomers and the environmental efficiency of a latex. Depending upon the end use of the adhesive, the EARTH Resin is available in numerous grafted modalities for improved end of person.

 


Free Dreamweaver Templates | Dedicated Hosting | Cheapest Web Hosting